Jumbotrac JT3 7'8" (No Flare)

Jumbotrac JT3 7'8" (No Flare)This kedered aluminum tubing is used as a rafter beam in the Jumbotrac 15' wide frame tent systems. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional 9 16" holes for connection of braces. This rafter beam is the sames as the Jumbotrac JT3 7'8" Leg but this part DOES NOT have flared openings for wall installation.

These gutters are fabricated from 16oz Blockout PVC Vinyl

Longest component is 9'3" in length

40' and 50' wide Jumbotrac gable systems

Base Material:Aluminum

The bottom of the wall is hemmed with a pocket to allow use of the Jumbotrac Plus Wall tensioning system (sold separately)

The top of the drape is pleated and hemmed with recessed white plastic hooks designed to attach to the sidewall rope line of most all frame and poles tents

The multi-piece laminating process results in significantly stronger construction compared to traditional sawn lumber

The Tidewater Squaring Jig is used to quickly mark leg and anchoring positions on the round ends of Tidewater Sailcloth tent system

Use only in a well ventilated area with proper protective equipment

Block and Roll® is a registered trademark of Nick Denino and its affiliate B&R Innovations

This size is utilized for tent sections such as a 20x20 1pc tent top or two 10x10 tent tops

(1) 4oz Can of HH-66 Vinyl Cement