Oil Line Support Assembly for FLOOR, c/w isolation rubbers / Angle SS for floor & Hardware

Oil Line Support Assembly for FLOOR, c/w isolation rubbers / Angle SS for floor & HardwareSecure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion. To install, slide the clamp into the strut channel, insert the insulated pipe, and tighten the clamping screw to secure. All are galvanized steel and TPO for good corrosion

Allowable gross mass: ≤1600kg (3520lbs)  @ SPEED 2

Complies with ASME A17

Rated Speed: ≤3

Single Phase 115/230 volt 60Hz

Left or Right

5m/s (500fpm)

Vibration isolation assembly for elevator equipment

Sizes from 1

Rated capacity of 20

An elevator limit switch is a safety device installed in elevators to prevent them from traveling beyond their designated floors

A strip of Stainless steel #4 mounted vertically on the leading edge of side sliding elevator doors used to reduce the opening between the leading edges of the hoistway and car doors and to block any sight of the hoistway with the doors are open

This retractable TOE-GUARD is a custom built